Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Remove the water tank from the device by lifting it from above. Open the
water tank by unscrewing the water tank cover from below.
3.
Fill the tank with fresh clear water. Ensure that the water temperature does
not exceed 40°C and the tank is not overfilled.
4.
Then screw the water tank cover back onto the tank properly.
5.
Afterwards, place the water tank back onto the base unit. Ensure that the
tank is firmly seated and does not wobble.
6.
Then, the cover with the mist outlet should be placed on the top of the tank.
7.
The power cable can then be connected to a properly installed power outlet.
The device is now ready to be used. Press the "POWER" button to start.
Please ensure that the On/Off switch is turned on.
8.
You can adjust the amount of mist output individually using the "+" and
"-" buttons. The LED indicates that the device is switched on. The intensity
level LEDs indicate the active intensity level.
14
English
Publicidad
