Publicidad
INSTRUCCIONES DE USO - INSTRUCTIONS FOR USE - INSTRUCTIONS D’USAGE
1.- Connect the PLO-000 to your PC and go to http://www.alcad.net/iaccess. Enter your
username and password.
2.- Run the communication program by clicking on the star-shaped icon, ensuring that the
star in the Windows system tray is coloured yellow.
3.- Consult the online manual for details of how to configure the key to be recorded.
4.- Place a key on the PLO-000 and press the record-key button.
5.- The green LED of the PLO-000 will light up while recording is taking place (approximately
3 seconds) and then go out. Remove the key and start the process over again with another
key until all the required keys have been recorded.
6.- If, during recording, the red LED lights up, this means that an error has occurred. Try once
again. If you still fail to record the key satisfactorily, this may be because the key is
incompatible with the iACCESS system. Discard the key and try again with another one.
Publicidad
