Kuppersbusch KI6750.OSR Instrucciones De Uso página 41

cursor "slider" of another timed zone
is pressed, the timer will show the
remaining time of that zone for a few
seconds and its indicator will show
its power level and the "t" alternately.
Changing the programmed time.
For modifying programmed time,
cursor "slider" (2) of timed zone has
to be pressed. Then it will be possible
to read and modify the time.
Through sensors (10) and
you can modify the programmed time.
Disconnecting the clock
If you wish to stop the clock before the
programmed time is up, this can be
done at any time by simply adjusting
its value to '--'.
1 Select the desired plate.
2 Adjust the value of the clock to "00"
by using the sensor
clock is cancelled. This can also be
done more quickly by pushing the
"sensors (10) and
same time.
Power Management function
This model is equipped with a power
limiting function (Power Management).
This function allows the total power
generated by the hob to be set to
different values selected by the user.
To do this, for the first minute after
having connected the hob to the power
supply, it is possible to access the
power limiting menu.
1 Press the (11) touch key for
three seconds. The letter PL will
appear on the timer indicator (12)
2 Press the locking touch key
The different power values to which
the hob can be limited will appear
and these can be changed using
the (11) and (10) sensors.
3 Once the value has been selected,
once again press the locking touch
key (6). The hob will be limited
to the chosen power value.
If you want to change the value again,
you must unplug the hob and plug it in
again after a few seconds. Thus you
will again be able to enter the power
limiting menu.
Every time the power level of a
hotplate is changed, the power limiter
will calculate the total power the hob
is generating. If you have reached the
total power limit, the touch control will
not allow you to increase the power
level of that hotplate. The hob will beep
and the power indicator (3) will blink
at the level that cannot be exceeded.
If you wish to exceed that value, you
(11),
must lower the power of the other
hotplates. Sometimes it will not be
enough to lower another by a single
level as this depends on the power of
each hotplate and the level it is set at.
It is possible that to raise the level of
a hotplate that of several smaller ones
must be turned down.
If you use the quick switch-on at
maximum power function and the
said value is above the value set by
the limit, the hotplate will be set to the
(10). The
maximum possible level. The hob will
beep and the said power value will
blink twice on the indicator (3).
(11) at the
Special functions: CHEF
These functions require
that the bottom of the vessel used
covers the two "P" of the cooking
zone; (see fig.4).
Fig.4
(6).
The Touch Control has special
features that help the user to cook
through the CHEF sensor
To activate a special feature on a zone:
1 First it should be selected; and then,
the decimal point (4) will be active
on the power indicator (3).
2 Now click on the CHEF sensor
(16). The sequentially successive
presses will go over all the Cooking
functions available in each zone
one by one. These functions
will show the activation with the
corresponding leds (17), (18), (19)
(20) ,(21) ,(22) and (23).
If you want to cancel a special active
function at any time, you should touch
the "slider" cursor sensor (2) of the
related zone to select it. The decimal
point (4) of the power indicator (3) will
light up. Then, touch again the "slider"
(2) cursor in the position ''0'' .
KEEP WARM FUNCTION
This function sets an automatic
power control suitable for keeping the
cooked food hot.
To activate it, select the plate, and
press on the CHEF sensor
until the led (17) located on the icon
lights up. Once the function is
activated, the symbol
on the power indicator (3).
You can override the function at
any time by turning off the plate,
by changing the power level or by
choosing a different special function.
MELTING FUNCTION
This function sets an automatic power
control suitable for maintaining a low
temperature in the cooking zone.
Ideal for defrosting food or for slowly
melting other food types as chocolate,
butter, etc.
To activate it, select the plate, and
press on the CHEF sensor
until the led (18) located on the icon
lights up. Once the function is
activated, the symbol
on the power indicator (3).
You can override the function at
any time by turning off the plate,
(16).
by changing the power level or by
choosing a different special function.
SIMMERING FUNCTION
This function sets an automatic power
control suitable for keeping simmering.
EN
(16)
will appear
(16)
will appear
41