Package Contents - Gemmy Airblown Inflatable 110074 Manual Del Usuario

Package Contents

A
Part
A
B
C
D Input:120-150VAC ~ 50/60Hz
Output: 12 V
Assembly Instructions
1
A
Ensure that the air intake on the
inflatable (A) unit is clear of fabric and
other obstructions and that the zipper
is fully closed. Some inflatables have
more than one zipper.
4
B
7
Once fully inflated, clip the nylon tethers
(B) to each of the attached nylon loops on
the side of the inflatable (A).
7
Do's and Don'ts
1. Do check your inflatable daily and adjust
to stand up straight.
2. Do not attempt to operate your inflatable
in unusually strong winds.(see caution)
3. Do not unplug by pulling on cord. For
faster deflation, unzip zipper after
unplugging power supply.
B
C
Description
®
Airblown Inflatable
Tethers
Stakes
UL - listed Power supply
1.0A
2
Connect UL- Listed power supply (D) into
connection of fan, plug power supply into
standard wall outlet .
5
A
Drive the stakes (C) into ground at a
45-degree angle.
D
Quantity
1
2
4
1
D
D
B
C
Visit
WWW.GEMMY.COM
©2020 GEMMY INDUSTRIES CORP.
117 WRANGLER DRIVE. SUITE 100
COPPELL, TX 75019 U.S.A.
1 (800) 274-6717
MADE IN CHINA / PRINTED IN CHINA
3
A
C
Using the loops attached at the bottom
of the Inflatable unit (A), insert stakes (C)
into the ground. Adjust weight-bag at the
base to position your Inflatable as desired.
6
For maximum stability, bring tether down
to a 45-degree angle from the inflatable as
shown in the illustration. In order to achieve
this you may need to wrap the excess
tether around the top of the stake.
for more information.