Instructions For Use - ARIETE Vapori 2600 Instrucciones De Empleo

The device is extremely simple to use
 Arter having taken the appliance out of its box,
screw the telescopic tube onto the main part of
the ampliance (Fig. ). Then turn the two ends
and pull them out to the desired lenght. Block
the upper part by turning clocwise (Fig. a
l b).
2 Secure the cable onto its hook at the top of the
tube (Fig.2).
3 Rest the base of VAPORI on its floorcloth as supl l
plied, making sure that the edges are secured
over the base (Fig. 3a).
4 Unscrew the cap and pour 2 doses of the
measuring cup into the tank, making use of the
special funnel: then screw the cap back on.
5 Now l and not before l put the plug into the
power supply source.
6 Press switch and wait for about 3 minutes (Fig.
5). Do not leave the device unattended during
the waiting period. Attention! Whenever
the device is left standing on the floor during
use, you may notice the formation of a whitish
"halo". This is no call for concern as it may be
removed using a normal decalcifying product
or with a few drops of vinegar.
7 As soon as VAPORI amits steam, begin using it,
passing slowly over the surface to be cleaned.
This is the ideal method for thoroughly cleaning
your floor.
8 When VAPORI no longger emits steam it that
there is no more water (this will take place

INsTRUCTIONs FOR UsE

4
Fig. 1a
Fig. 1
Fig. 1b
Fig. 2
Fig. 2a