Technical Speci Cations - KlipXtreme KCR-501 Guía De Instalación Rápida

2. Your operating system will automatically detect the device,
and your device is now ready to use.
3. The hub provides card slots for the most popular card
formats as well as HDMI, and USB 3.0 ports.
Warning: Insert the memory card carefully in the right
direction. Please do not attempt to force cards into the slot.
This may damage the device or the card, leading to the
corruption or loss of your valuable data.
Important
• For preventing any damage or data loss, do not remove the
memory card, HDMI cable, USB 3.0 device or USB-C device
while data is being transmitted.
• In case of any operating error as a result of the
malfunctioning of the card reader, please unplug it and
re-plug again; this will reset the device in order to resume
normal operation of the device.

Technical speci cations

MPN
Device
Connector type Supports: 1xUSB-C PD 2.0 port,
2x USB 3.0A, 1x HDMI, 1 x microSD™ (TF),
1x SD™ cards
Functions Card reader: MicroSD™ (TF card) and SD™
USB hub: Two USB-A 3.0 ports 3Amp
5GBPS
Pass through charging: USB Type-C PD
60W, 5V-20V input port
HDMI V1.4: Output 4K*2K @ 30Hz
Memory cards supported SD™/microSD™ (TF)
Note: SD™ card and TF memory card
cannot be connected at the same time, if
you do so, neither will be recognized. You
must access each memory card
individually for it to work.
Supported devices Devices with a Type-C port as speci ed in
connector type spec.
System requirements Windows® XP/10/8/7
Mac OS X: (El Capitan, Yosemite,
Mavericks, Mountain Lion, Lion)
MacOS: (Mojave, High Sierra, Sierra)
Dimensions (LxWxH) 3.9x1.1x0.4in
Weight 1.52oz
Warranty One year
KCR-501