Installing Lp Gas Tank - Blue Rhino GAD17300B Manual Del Usuario

Mesa y chimenea para exteriores a gas propano líquido
Ocultar thumbs Ver también para GAD17300B:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Do not return to place of purchase.
Assembly Instructions (continued)
OPTIONAL ITEM SOLD SEPARATELY
12
Place Fire Glass
W CAUTION: When switching from lava rock, remove all lava
rock before placing fire glass.
W CAUTION: Do NOT dump fire glass out of package. Carefully
place fire glass by hand so dust does not clog burner.
W CAUTION: Use only Mr. Bar-B-Q Products LLC factory-
authorized fire glass. The use of any fire glass that is not
factory-authorized can be dangerous and will void your
warranty.
W CAUTION: Do NOT cover igniter cover.
Note: Fire glass should be 0 .8-1 .6 in (2-4 cm) diameter . Approx . 11 lbs (5 kg) of fire
glass is needed .
Need
Propane?
Available at:
Need help? 1.888.398.8643

Installing LP Gas Tank

To operate, you will need one precision-filled standard grill LP gas
tank with external valve threads .
W CAUTION: LP gas tank must be properly
disconnected and removed prior to moving this
outdoor fire pit.
Inserting LP Gas Tank
W WARNING: Make sure LP gas tank valve is closed.
1 .
Remove door .
2 .
Make sure the control knob is in the " OFF" position (Figure 3) .
3 .
Loosen LP gas tank retainer bolt by turning counter-clockwise .
4 .
Place precision-filled LP gas tank upright into hole in outdoor fireplace base so the tank
valve is facing the gas line connection .
5 .
Secure tank by turning LP gas tank retainer bolt clockwise until tight .
6 .
Replace door .
Connecting LP Gas Tank
1 .
Make sure the control knob is in the " OFF" position
(Figure 3) .
2 .
Before connecting, be sure there is no debris caught in the
head of the LP gas tank, head of the regulator valve or in the
head of the burner or burner ports .
3 .
Connect regulator/hose assembly to tank by turning knob
clockwise until it stops .
4 .
Perform leak check per "Checking for Leaks" section .
Disconnecting LP Gas Tank
1 .
Make sure the control knob is in the " OFF" position
(Figure 3) .
2 .
Before disconnecting, make sure the LP gas tank valve is
"CLOSED ."
3 .
Disconnect regulator/hose assembly from LP gas tank by
turning knob counterclockwise until it is loose .
W CAUTION: LP gas tank must be properly
disconnected and removed prior to moving
this outdoor fire pit.
4 .
Place the protective cap cover on the LP tank and store the
tank outdoors in a well ventilated area out of direct sunlight .
Replacement Parts
1.888.398.8643
20 lb
9 Kg
12.2 in. / 31 cm
9

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido