Power Supply - Bosch Rotak 33 Manual Original

Ocultar thumbs Ver también para Rotak 33:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 25
OBJ_BUCH-1919-004.book Page 12 Tuesday, July 1, 2014 9:57 AM
12 | English
 Switch on the motor according to
the instructions with feet well away
from rotating parts.
 Do not put hands or feet near or un-
der rotating parts.
 Always stand clear of the discharge
zone when operating the machine.
 Never pick up or carry the machine
while the motor is running.
 Do not modify this product. Unau-
thorized modifications may impair
the safety of your product and may
result in increased noise and vibra-
tion.
 Regularly inspect the supply cable
and any extension cables. Do not
connect damaged cables to the sup-
ply or touch a damaged cable before
it is disconnected from the supply. A
damaged cable can lead to contact
with live parts. Beware electric
shock hazard.
Leaf Collect
The leaf collect blade has been de-
signed to allow you to pick up autumn
leaves from your lawn. In order for this
functionality to work within optimal pa-
rameters, please note the following:
– only collect leaves with the machine
set at 70 mm cutting hight
– collect leaves from your lawn only
– before collecting leaves inspect the
area where the machine is to be used
and keep people, pets, glass struc-
tures and cars away from use
Remove the plug from the socket:
– Whenever you leave the machine.
– Before clearing a blockage,
F 016 L81 153 | (1.7.14)
– Before checking, cleaning or working
on the machine,
– After striking a foreign object. Inspect
the machine for damage and make re-
pairs as necessary,
– If the machine starts to vibrate abnor-
mally (check immediately).

Power supply

 The voltage indicated on the rating
plate must correspond to the volt-
age of the power source.
 We recommend that this equipment
is only connected into a socket
which is protected by a circuit-
breaker that would be actuated by a
30 mA residual current.
 Only use or replace power supply
cables for this unit which corre-
spond to the types indicated by the
manufacturer. See the operating in-
structions for the order no. and
types.
 Never touch the mains plug with wet
hands.
 Do not run over, crush or pull the
power supply cable or extension
lead, otherwise it may be damaged.
Protect the cable from heat, oil and
sharp edges.
 The extension lead must have a
cross section in accordance with the
operating instructions and be pro-
tected against splashed water. The
connection must not be in water.
Always wear gardening gloves when
handling or working near the sharp
blades.
Bosch Power Tools

Publicidad

Tabla de contenido
loading

Tabla de contenido