Handling Batteries; Troubleshooting - monzana MZAS120W Manual Del Usuario

22
Note: If the vacuum cleaner does not work after charging the battery, replace the battery.
If the cleaner still does not work with the new battery, contact customer support.
If the battery has become warm after being completely drained at a faster rate, allow it
to cool for a few minutes until it has cooled back to normal room temperature before
charging the battery.
Tipp: To maximize the life of a lithium ion battery, it is recommended not to charge it
after each use. Batteries last longer if they are not permanently empty or completely
full.
CAUTION: Do not disassemble batteries and charger.
• Do not heat batteries or throw them into fire.
Since this battery is only for this vacuum cleaner, do not use it for any other
•
appliance or other purpose.
If you remove a battery from an appliance that is in use, it may cause malfunction.
•
If the solutions below do not help you solve your problem, contact customer support
or a qualified workshop.
Problem
Always switch off the appliance and unplug the power cord before carrying out maintenance on
the vacuum cleaner!
Vacuum cleaner does not
start
Vacuum cleaner gets
unusually hot
Vacuum cleaner makes
louder/ unusual noises
Suction capacity decreases
Odor development during
operation

Handling batteries

Troubleshooting

Solution
check that the battery is inserted correctly
•
fully charge the battery
•
• check that all components are correctly assemble
• Check that all air outlets are free and not covered by debris.
• clean all filters
• Empty the dust tank
clean all filters
•
• check if the brush is clogged or something is caught on it
check the suction pipe for debris or clogging
•
clean all filters
•
fully charge the battery •
•
• check if the brush is clogged or something is caught on it
check the suction pipe for any debris or clogging
•
• clean all filters
• Check that all air outlets are free and not covered by debris.
www.DeubaXXL.de