Publicidad
Idiomas disponibles
Idiomas disponibles
IF YOU REMOVED THE SIDE PANELS:
1. Attach the armrest hoses to the corresponding air valves on the side of the chair.
2. Align the mounting point at the rear of the side panel with the latch on the side of the chair, then slide the mounting point
into the latch.
3. Replace the Allen screw to secure the front of the side panel to the chair.
ATTACH THE REMOTE CONTROL AND POWER CORD
1. Plug the power cord into the receptacle on the back rear of the chair.
2. Plug the remote control cord into the receptacle on the inside of the right side of the chair, near the seat.
3. Turn the metal ring surrounding the remote control connector clockwise to secure it.
Remote control cord
4
All manuals and user guides at all-guides.com
Power cord
Back of chair
POWER ON
1. Plug the power cord into a grounded 120-volt outlet.
2. Turn the power switch on the right-hand side of the
chair to On.
3. Make sure the remote control is secured in the
remote control pocket, then take a seat.
Power cord
5
Publicidad
