Setup Steps - LaCie eSATA/USB 2-in-1 Guía De Instalación Rápida

Setup Steps

1. Turn off your computer and all connected peripherals.
2. Disconnect your computer from all power sources.
3. Open the computer's case. Refer to your computer's user manual for details.
4. Find an available PCI Express slot and remove the slot bracket. Save the
bracket screw for later use. (A)
5. Align the card with respect to the PCI Express slot and insert it into the slot
firmly and evenly. Be careful not to force it into the slot. Once you have
properly positioned the card into the slot, fasten it to the computer case with
the bracket screw. (B)
6. Replace the computer case and switch on your computer.
For Mac Users: You must install drivers for Mac OS X. Launch the installer tool on
the CD (the *.pkg file) and follow the installation steps.
For PC Users: You must install drivers for Windows 2000, XP , Vista, and Windows 7.
Once the card has been detected on your operating system, install the correct driver
from the Utilities CD-ROM and follow the on-screen instructions.
Note: Optional RAID software utilities are located on the CD-ROM.