Pnp/Pci Configurations; Frequency/Voltage Control - DFI PE11-TC Manual Del Usuario

All manuals and user guides at all-guides.com
1
Quick Setup Guide

1.5.7 PnP/PCI Configurations

PNP OS Installed
Reset Configuration Data
Resources Controlled By
X IRQ Resources
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
PCI Slot 1&5 Use IRQ
PCI Slot 2 Use IRQ
PCI Slot 3 Use IRQ
PCI Slot 4 Use IRQ
↑↓→← Move
F5:Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.

1.5.8 Frequency/Voltage Control

CPU Clock Ratio
Auto Detect PCI/DIMM Clk
Spread Spectrum
CPU Clock
↑↓→← Move
The settings on the screen are for reference only. Your version may not be
identical to this one.
22
66500237 1.pmd
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
No
Disabled
Auto(ESCD)
Press Enter
Disabled
Enabled
Enabled
Auto
Auto
Auto
Auto
Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F6:Fail-Safe Defaults
Phoenix - AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
8 X
Enabled
Enabled
100MHz
Enter:Select +/-/PU/PD:Value F10:Save
F5:Previous Values F6:Fail-Safe Defaults
22
Item Help
Menu Level
Default is Disabled.
Select Enabled to
reset Extended System
Configuration Data
(ESCD) when you exit
Setup if you have
installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot.
F1:General Help
F7:Optimized Defaults
Item Help
Menu Level
ESC:Exit F1:General Help
F7:Optimized Defaults
9/27/02, 4:15 PM