Ryobi RLM18X40H240 Traducción De Las Instrucciones Originales página 6

■ For transportation, remove isolator key,
secure the machine against movement
or falling to prevent injury to persons or
damage to the machine.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local
and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further
advice.
WARNING
Use extreme caution when lifting or tilting the
machine for maintenance, cleaning, storage
or transportation, the blade is sharp, keep
all body parts away from the blade whilst it
is exposed.
MAINTENANCE
WARNING
Use only original
replacement parts,
attachments. Failure to do so can cause
injury, poor performance and may void your
warranty.
WARNING
Servicing requires
knowledge and should be performed
only by a qualifi ed service technician. For
service we suggest you return the product
to your nearest authorized service center for
repair. When servicing, use only identical
replacement parts.
■ Remove the isolator key and if possible
the battery, before any cleaning or
maintenance task.
■ You may make adjustments and repairs
described here. For other repairs, contact
the authorized service agent.
4 | English
manufacturer's
accessories and
extreme care and
■ Check the grass box frequently for wear or
deterioration.
■ After each use, clean the product with a
soft dry cloth. Any part that is damaged
should be properly repaired or replaced by
an authorised service centre.
■ Check all nuts, bolts and screws at frequent
intervals for proper tightness to ensure the
product is in safe working condition.
■ Be careful during adjustment of the
machine to prevent entrapment of the
fingers between moving blades and fixed
parts of the machine.
■ When servicing the blades be aware that,
even though the power source is switched
off, the blades can still be moved.
RISK REDUCTION
It has been reported that vibrations from hand-
held tools may contribute to a condition called
Raynaud's Syndrome in certain individuals.
Symptoms may include tingling, numbness
and blanching of the fi ngers, usually apparent
upon exposure to cold. Hereditary factors,
exposure to cold and dampness, diet,
smoking and work practices are all thought
to contribute to the development of the these
symptoms. There are measures that can be
taken by the operator to possibly reduce the
effects of vibration:
■ Keep your body warm in cold weather.
When operating the unit wear gloves to
keep the hands and wrists warm. It is
reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■ After each period of operation, exercise to
increase blood circulation.
■ Take frequent work breaks. Limit the
amount of exposure per day.
If you experience any of the symptoms of this
condition, immediately discontinue use and
see your doctor about these symptoms.
WARNING
Injuries may be caused, or aggravated, by
prolonged use of a tool. When using any
tool for prolonged periods, ensure you take
regular breaks.