Magnat SELECTION 216 REFERENCE Manual Del Propietário página 5

DEAR CUSTOMER,
We congratulate you on acquiring this MAGNAT
Car Stereo Product.
Please read these instructions carefully so as
to ensure optimum
functioning of the
modifications reserved.
POSITIONING AND SECURING THE SPEAKER
SYSTEM (FIG. 1)
Use the mounting positions provided in your
vehicle. If the speakers do not fit, they can be
placed in the rear window shelf.
Fig. 1
(1) Depth
(2) Driver diameter
Fig. 1A
(1) Use mounting ring to mark position of speaker
opening and fastening holes
(2) Cut out opening and drill holes
Make sure that the subwoofer is secured in
such a way that it cannot slip or slide. Use the
screws provided for this purpose. Damage
resulting from sudden changes in speed (e.g.
hard braking) is not covered under the terms of
our guarantee.
CONNECTING TO THE RADIO / AMPLIFIER
(FIG. 2)
The speaker system
connected to an external power amplifier. This can
provide the required electrical power and create
corresponding dynamic reserves. The relevant
instructions also contain
connection diagram for the operation of a speaker
system.
Should you not have a power amplifier, the
speakers can also be connected directly to the
radio. The relevant operating instructions also
contain the connection diagram for this situation.
Please note that only limited dynamic reserves
will be available in this case. Excessively low
outputs combined with high distortions can
destroy your speakers.
GB
and disturbance-free
appliance. Technical
should preferably be
the customized
Autogoods "130"
TWEETER LEVEL SWITCH (FIG. 2)
This switch can be used to raise or lower the
tweeter level by 3 dB. The best position can be
determined by listening and trying it out.
TWEETER PROTECTION
(SELECTION 216 REFERENCE, 216, 213)
There is a protective element integrated into the
crossover of your SELECTION tweeter, which has
high impedance in cases of overload and reduces
the current flowing through the tweeter. If the
tweeter is deactivated, please turn down the
volume and wait for a moment. After cooling down,
the tweeter will re-activate and is ready for
operation again.
INSTALLING THE TWEETER (SELECTION 216
REFERENCE, 216, 213) (FIG. 3)
INSTALLING THE GRILLE (FIG. 4)
4
POLYSWITCH