Mx Onda MX-HD2424 Manual De Instrucciones página 82

USE OF THE ORAL IRRIGATOR
Filling the reservoir
1. Check that the irrigator is unplugged from the
mains socket.
2. Remove the reservoir 2 from the base and
remove the lid 1 from the reservoir.
3. Fill the reservoir without exceeding the maximum
capacity of the same, you can use water from
time, hot water (without the temperature of the
same exceeds 40 °C) or mixed with some type of
mouthwash or liquid mouthwash.
4. Replace the cover in the reservoir, and place the
reservoir in the base, pressing it lightly until it is
correctly fitted.
Inserting and removing the tips
To insert the tip in the handle, match the axis of the handle with the hole
in the handle, then push the tip towards the handle (figure A), you will
notice that the rotation ring of the tip 6 slides down, and You will hear a
"click" signal that the tip is properly retained.
To remove the tip, press the release button 7, then pull the tip upwards
(figure B).
Figure A (Inserting) Figure B (Removing)
7