Frequently Asked Questions - Philips IronCare GC024/10 Manual De Instrucciones

EnGlish
12
Question
Why is there scale on
my iron even though
I have been using
treated water from
the IronCare water
descale filter?
The anti-calc cartridge
changes colour
gradually as I use
the IronCare water
descale filter. Is this
normal?
- If the IronCare water descale filter is used improperly
or for professional or semi-professional purposes or if
it is not used according to the instructions in the user
manual, the guarantee becomes invalid and Philips
refuses any liability for damage caused.
- The guarantee is not valid if a defect is due to
damage caused by incorrect use, poor maintenance
or if alterations or repairs have been carried out by
persons not authorised by Philips Consumer Lifestyle.
Note: These guarantee restrictions do not affect your
statutory rights.

Frequently asked questions

Answer
The anti-calc cartridge may have reached
the end of its effective life or may have been
exposed to conditions that have reduced its
effectiveness. Please check the colour of the
anti-calc cartridge and replace it if the colour
has fully changed to brown.
Scale may have built up on your iron before you
started using the IronCare water descale filter. You
may need to descale your iron to remove existing
scale first before your next ironing session.
Yes, this is normal. The colour of the material inside
the anti-calc cartridge changes from blue when
the anti-calc cartridge is new to brown when it
has been used for some time. When the anti-calc
cartridge has turned completely brown, you have
to replace the anti-calc cartridge with a new one.