For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-328-5863.
Important Safety Information
• CAUTION - Before driving, ensure that the hood scoops are properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check that all components are secured.
• When using Surface Prep, avoid contact with skin. Use in well ventilated area. If contact is made with
material, flush area with large amounts of water. If irritation persists, get immediate medical
attention.
Contents
NOTE: Actual product may vary from illustration.
Hood Scoop x1
(various styles shown)
Car Wash Supplies
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash your vehicle's hood to remove any debris and/or dirt.
• Dry the hood with a clean towel.
Installation Steps
Thoroughly wash and dry hood.
1
Installation Instructions
Eclipse
™
(depending on application)
NOTE: Actual application may vary slightly from illustrations.
Hood Scoop
Screen Insert x1 or x2
Alcohol Pad x2
Clean Towel
Center part on hood, and mark edges for reference with
equal
distant
from
hood
edge
2
Page 1 of 2
I - Sheet Number LUNDHS01 Rev.B
Primer stick
x1
Masking Tape
masking tape.
hood center-
Decal x2
line