Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 3
1
#5 BOLT M6*15
STEP 3:
At the front brace of the seat/back assembly (#1), fasten the seat/back
assembly (#1) to the left leg (#2) by using bolt (#5). Keep the bolts loose.
See Figure 3.
NOTE:
The labels marked "L" and "R" on the legs (#2 and #3) should coincide with
Figure 3 - Figure 5 to ensure proper assembly.
FIGURE 5
R
3
1
2
STEP 5:
Insert the right leg (#3) into the support brace (#4). Fasten the right leg (#3) to
the support brace (#4) and the seat/back assembly (#1) by using bolts (#5).
Keep the bolts loose. See Figure 5.
FIGURE 7
7
STEP 7:
Turn the assembled parts to their upright position. At the rear of the chair,
fasten the seat/back assembly (#1) to the legs (#2 and #3) by using bolts (#7).
Make sure that all of the bolts have been tightened completely. See Figure 7.
Cleaning and Maintenance
• Wash frame parts and fabric with mild soap and water, rinse thoroughly, Dry frame completely. Do not use bleach, acid, or other solvents
on the fabric or frame parts.
• The chair fabric may be washed on the surface only by using mild soap and water if necessary. Commercial foaming upholstery cleaner
may also be used.
• We recommend the use of furniture covers to protect your chair when not in use.
• Inspect and tighten all bolts or fasteners on a regular basis to ensure the proper performance and safety of your chair.
• In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and protected area during off season periods.
Warranty
• This product is covered by Courtyard Creations Inc. 3 years
limited warranty.
• Proof of purchase (dated register receipt) is required for warranty
claims.
• It remains the customer's responsibility for freight and packing
charges to and from the service center.
V-3
5
L
2
5
5
4
L
#5 BOLT M6*15
1
3
2
4
35
#7 BOLT M6*35
DON'T RETURN TO STORE!
STOP
FIGURE 4
1
15
STEP 4:
Insert the support brace (#4) into the left leg (#2). The holes in the support
brace (#4) must be facing the inside of the chair. Fasten the left leg (#2) to the
support brace (#4) by using bolt (#5). Keep the bolts loose. See Figure 4.
FIGURE 6
1
15
STEP 6:
At the front brace of the seat/back assembly (#1), fasten the seat/back
assembly (#1) to the legs (#2 and #3) by using bolts (#6). Keep the bolts
loose. See Figure 6.
FIGURE 8
STEP 8:
Turn the chair to its upright position. See Figure 8.
STOP!
Missing A Part?
No Need To Go Back To
The Store
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
service.cci@polywares.com
PAGE 2 OF 2
4
5
2
#5 BOLT M6*15
3
4
2
6
#6 BOLT M6*14
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
15
14
Publicidad
