Publicidad
Idiomas disponibles
Idiomas disponibles
K-852-HB
Pump/Control Access
34" (86.4 cm) W x 15" (38.1 cm) H
10" (25.4 cm) Max
16"
(40.6 cm)
1-5/8"
(4.1 cm)
2-1/2"
(6.4 cm)
Product Information
Applicable product:
Bath whirlpool, custom pump
Bath whirlpool, custom pump
Fixture*:
Bathing well:
Basin area, bottom
40-1/2" (102.9 cm) x 20" (50.8 cm)
Basin area, top
52-3/4" (134 cm) x 24" (61 cm)
Weight
290 lbs (131.5 kg)
To overflow:
Water depth
13-5/8" (34.6 cm)
Capacity
60 gal (227.1 L)
* Approximate measurements for comparison only.
Drop-in cutout
58-1/2" (148.6 cm) x 30-1/2" (77.5 cm)
dimensions:
Cut-out for undermount
Pump
kW
1.5
* Approximate measurements for comparison only.
Minimum access panel
pump/control (required):
1019495-1-E
6" (15.2 cm) Max
14" (35.6 cm)
60" (152.4 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-852-HB
K-852-HE
K-586 template
V
A*
240
11
34" (86.4 cm) W x
15" (38.1 cm) H
No change in measurements if connected with
drain illustrated. (K-7169-AF or K-7169M-AF)
K-852-HE
Pump/Control Access
34" (86.4 cm) W x 15" (38.1 cm) H
1/4" (6 mm)
Required accessories:
Clearflo pop-up bath drain
Jet trim kit
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor/control
Installation Notes
Install this product according to the installation guide.
Cast iron whirlpools are extremely heavy, making some drop-in
installations difficult. Splitting the deck/surround is recommended
if installing into a deck.
Floor support under whirlpool must provide for a minimum of 60
lbs/square foot (290 kg/square meter) loading.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All
dimensions are nominal.
2
32" (81.3 cm)
3/4" (1.9 cm)
18-1/4"
(46.4 cm)
K-7169-AF
K-9696
220-240 V, 15 A, 50/60 Hz
1-1/2" OD
Kohler Co.
Publicidad
