Uniteck UNIFIX 20.1 WB Manual Del Usuario página 5

Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions
carefully and thoroughly before using the product.
DESCRIPTION
Unifix 20.1 WB brackets have been specially designed to fix your Unisun 10.12M/ 20.12M photovoltaic
panels.
They can be installed on all balconies or handrails with tubes from 20 to 45 mm in diameter (minimum
tube length: 150 mm).
Thanks to their structure and marine stainless steel screws and bolts, they are perfectly suited for use
in saline environments.
Equipped with a multi-position tilting system, Unifix brackets allows for an optimization of your panel's
performance depending on the chosen orientation.
To connect the the panel / regulator / battery, we recommend that you use the Uniconnect 1.6 ready-to-use
kits that optimizes your electrical performance and simplifies installation (kit for connecting 1 panel)
•
The arrangement of the sensors influences your electrical performance. Choose the optimum tilt
and orientation according to your environment. Avoid shaded areas or objects that may cause
shadows.
• For more energy, it is possible to use two solar systems:
- panels with the same orientation: installation in parallel (two panels + one regulator +
one wiring kit + branch connectors)
-
panels with opposite orientations: two separate installations (one panel + one controller
+ wiring kit) x2
Electrical performance depending on tilt and panel
orientation
0°
East 93%
South east 93%
South 93%
South west 93%
West 93%
www.uniteck.fr
30° 60°
90% 78%
96% 88%
100% 91%
96% 88%
90% 78%
EN
90°
55%
66%
68%
66%
55%
5/14