Tripp-Lite TLNETCARD El Manual Del Propietario página 6

IP Address Assignment
1
On-Network, Dynamic: Connect a standard Ethernet patch cable to
the RJ45 Ethernet port on the card.
Note: This port does not support PoE (Power over Ethernet) applications.
The card will attempt to obtain an IP address via DHCP . This may take
as long as several minutes, depending on your network environment.
Use the TLNET Configurator utility to Discover the TLNETCARD in order
to identify the assigned IP Address; it will be associated with the
TLNETCARD's MAC address that you recorded in the Preparation
section, step
re-assign the IP Address to a static one, if required; access will require
the Adminstrator login credentials: admin / password.
2
On-Network, Default: Connect a standard Ethernet patch cable to
the RJ45 Ethernet port on the card.
Note: This port does not support PoE (Power over Ethernet) applications.
If a DHCP Server is unavailable, the TLNETCARD can be accessed via
web browser or telnet/SSH using its default IP address:
192.168.1.100. The Administrator login credentials are:
admin / password.
3
Off-Network: Refer to TLNETCARD's User Guide for instructions on
how to access and configure a TLNETCARD through its serial COM
port.
Please refer to the TLNETCARD User's Guide for instructions on
configuring other TLNETCARD attributes. This manual can be accessed
and downloaded at tripplite.com/support and typing TLNETCARD in the
search field.
16-01-412-933525.indb 6
. The TLNET Configurator can then be used to
3
6
1/28/2016 3:02:05 PM