Publicidad
2.5-inch Hard Drive: How to Install the Hard Drive
C
如何安裝硬碟/ So installieren Sie die Festplatte / Comment installer le disque dur / Come installare l'unità HDD / Cómo instalar la unidad de disco duro /
Como Instalar o Disco Rígido / 하드 드라이브를 설치하는 방법 / ハードドライブの取り付け方法
1. Remove the four screws on the bottom case.
2. Attach the HDD to the hard drive
en li up and remove the bottom panel.
mounting bracket and secure it using
the four screws.
4.
en reinstall the bottom panel.
*For NUC BOX series, it is not recommended to install 2.5" HDD. If you install the 2.5" HDD, please keep the NUC BOX in a vertical position to ensure
better cooling performance.
SO-DIMM Slots: How to Install the Memory Modules
D
如何安裝記憶體模組 / So installieren Sie die Speichermodule / Comment installer les modules de mémoire / Come installare i moduli di memoria / Cómo instalar los módulos de memoria /
/ Como Instalar os Módulos de Memória / 메모리 모듈/ メモリモジュール
1. Carefully insert the SO-DIMM memory modules
2. Push down until the modules snap into place.
into the slot at a 30-degree angle.
How to Install the M.2 Heatsink
如何安裝 M.2散熱片 / So installieren Sie den M.2-Kühlkörper / Comment installer le dissipateur thermique M.2 / Come installare il dissipatore M.2 / Cómo instalar el disipador M.2 /
.2 / Como instalar o M.2 Heatsink / How to Install the M.2 Heatsink / M.2 방열판 설치 방법 / M.2 ヒートシンクの取り付け方法
1. Gently insert the M.2 module, along the
2.
Remove the membranes from both sides of
guiding tabs, into the heatsink bracket.
the thermal pad.
onto the M.2 module.
3. Attach the HDD assembly to the bottom panel
and secure it using the four screws. Connect
the SATA Data and Power Cable to the HDD.
(DDR4 (1.2V))
Note:
-
e NUC BOX requires DDR4 SO-DIMM (1.2V).
- For dual channel con guration, you always need to
install identical (the same brand, speed, size and
chip-type) DDR4 SO-DIMM pairs.
3. Align the heatsink to the edge of the bracket and
en paste the thermal pad
press down the heatsink into the bracket until it
clips into place.
How to install a M.2 M-key module with a M.2 E-Key module
/
1. Remove the default screw securing the
M.2 E-Key (Wi-Fi) module, and replace
it with the hexagon stando .
How to Install the VESA Bracket
如何安裝 VESA 支架/ So installieren Sie die VESA-Halterung / Comment installer le support VESA / Come installare il supporto VESA / Cómo instalar el soporte VESA /
VESA / Como Instalar a Braçadeira VESA / VESA 브래킷을 설치하는 방법 / VESA ブラケットの取り付け方法
1. Attach the two screws to the base of the
NUC BOX.
Positions of the NUC BOX
NUC BOX 系列擺放 / Positionen der NUC BOX / Positions de la série NUC BOX / Posizioni della NUC BOX / Posiciones de la NUC BOX /
NUC BOX 시리즈의 위치 / NUC BOX シリーズの位置
e NUC BOX can be placed in vertical or horizontal position.
Horizontal Position
Vertical Position
*Please note that keeping the NUC BOX series in a vertical position will ensure better cooling performance.
e terms HDMI® and HDMI High-De nition Multimedia Interface, and the HDMI logo are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other countries.
2. Carefully insert the M.2 M-key Module
3. Tighten the screw to secure the M.2 module
with heatstink into the slot.
and the heatsink to the motherboard.
2. Attach the VESA Bracket to the rear of
3. Mount the NUC BOX by sliding
a compatible display using the four screws.
it into place.
*Choose mounting holes depending on the
mounting hole pattern of your LCD screen
(75 mm × 75 mm or 100 mm × 100 mm).
Wall-mounted
NUC BOX / Posições de NUC BOX /
Publicidad
