Publicidad
First-Time battery charge
NOTE: Before using the mobile devices for the first time
or after they have spent some time in storage, ensure that the
mobile devices have a full (100%) charge.
Prior to first-time use, allow the mobile devices to charge in the MCC for at least 2-3 hours before removing them for use.
Monitoring mobile device power (Managed Carts only)
T
he Power/Fault Status Indicator lights near the MCC top surface communicate the following conditions:
Power/Fault Status Indicator Signal
Zones
Notebook Shelf Removal
a
888-24-270-M-01 rev.B • 03/14
White light, solid
White light, slow flash
White light, fast flash
All Fast Flashing
Amber light, flashing
White light, solid
* When recommended temperature has been exceeded, power to the mobile
devices is terminated. Charging resumes once the temperature falls within an
acceptable operating range.
NOTE: Charge status of individual mobile devices can be seen directly on mobile devices.
b
Meaning
Power "ON"
Zone is charging
Zone is scanning
Overcurrent. Reset by removing excess devices
on aux outlet. Unplug and re-plug the cart.
Maximum temperature has been exceeded *
Auxilary outlets in use
c
d
7 / 13
Publicidad
