Conceptronic C100BRS4H Guía De Instalación Rápida página 20

ENGLISH
1.5 Explanation of controls
6
2
1 3 4 5 7
LED's on the Conceptronic C100BRS4H:
1 - LED for PWR (Power): will turn green when the C100BRS4H is connected to the powersupply
2 - LED for 10/100: Orange when a 10Mbps device is connected, Green for a 100Mbps device
3 - LED for LNK/ACT (Link / Activate)
4 - Power Connection 12V DC – 500mA
5 - 4 LAN ports (RJ-45)
6 - 1 WAN port (RJ-45)
7 - Reset Button
With the delivered RJ-45 Network cable you can connect your ADSL or Cable modem to your Conceptronic
C100BRS4H
Reset button
The reset button is meant to restore all settings to factory defaults.
Factory reset or Restart might be helpful to get the C100BRS4H broadband router back to function
normally.
NOTICE:
When you connect the C100BRS4H to the poweroutlet, it can take up to 10 seconds before the router is
operational and ready to use.
WARNING:
If you upgrade firmware into the broadband router do not try to Factory reset, Software reset or
power off the device. This can result in a broken C100BRS4H.
20