Charging The Receiver - Mpow MBR1 Manual De Usuario

EN
Bluetooth Version: V4.1 EDR
Frequency Range: 2.4GHz
Operation: Class2
Bluetooth Mode: HFP/HSP/A2DP/AVRCP
Bluetooth Range: up to 30 feet
Charge time: 1.5 hours
Playing time: up to 10 hours
Charge Voltage: DC 5.0V
Instruction
1. Connect the receiver to your home stereo system
or car stereo system via the 3.5mm audio cable /
adapter.
2. Pair the receiver to your phone.
3. Now you can enjoy your music through the home
stereo system or car stereo system.
Remark
If you want to use it in the car stereo system, you
need to adjust the car radio to AUX in.
03

Charging The Receiver

You must charge the receiver fully before using
1. Connect the USB charging cable to the USB
charge port of the receiver.Do not use charger
over 5V to charge the product, it may destroy
the product.
2. The light indicator will turn into red when charg-
ing.
3. The full charge takes about 1.5 hours.
4. The red light indicator goes out when charging
completed.
Power On/Off The Receiver
Power on: Press the multifunction button about 3
seconds until the blue and red indica-
Press the multifunction button for
about 3 seconds until the blue indica-
Pair To Your Phone
must pair it with your phone.
04