Spdif Output; Setting The Time Media.P; Setup Menu; Using The Sleep Timer - Samsung 5 Serie Manual De Usuario

Ocultar thumbs Ver también para 5 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

speaker select
(External speaker / TV speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External speaker.
When
speaker select is set to External speaker, the
volume and
MUTE
buttons will not operate and the
sound settings will be limited.
When
speaker select is set to External speaker, you
should use these settings.
x
TV speaker: Off, External speaker: On
When
speaker select is set to TV speaker, you
should use these settings.
x
TV speaker: On, External speaker: On
If there is no video signal, both speakers will be mute.

sPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
Audio Format
: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
By connecting to 5.1ch speakers in a dolby
digital setup, maximize your interactive 3D sound
experience.
Audio Delay
: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
sound Reset
Reset all sound settings to the factory defaults.

Setup Menu

setting the Time
¦
O
MEnU
m → setup → Time → EnTERE
Time
The current time will appear every time you press the
InFO
button.
Clock
: Setting the clock is for using various timer
features of the TV.
If you disconnect the power cord, you have to set
the clock again.
Clock Mode: Set up the current time manually or
automatically.
Auto
: Set the current time automatically using the
time from a digital channel.
The antenna must be connected in order to set
the time automatically.
: Set the current time manually.
Manual
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock set: Set the Month, Day, Year, hour, Minute
and am/pm.
Available only when
Manual.
You can set the month, day, year, hour and minute
directly by pressing the number buttons on the
remote control.
DsT (Off / On): Switches the DST(Daylight Saving Time)
function on or off.
This function is only available when the
Mode is set to Auto.
Time Zone: Select your time zone.
This function is only available when the
Mode is set to Auto.

Using the sleep Timer

¦
O
MEnU
m → setup → Time → sleep Timer →
EnTERE
t
sleep Timer
: Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
To cancel the
sleep Timer, select Off.

setting the On/Off Time

¦
O
m → setup → Time → Timer 1 →
MEnU
EnTERE
Timer 1 / Timer 2 / Timer 3
timer settings can be made. You must set the clock first.
Timer 1
On Time
Inactivate
12
Off Time
Inactivate
12
Volume
Source
10
TV
Repeat
Sun
Mon
Once
L Move U Adjust E Enter R Return
Clock Mode is set to
Clock
Clock
: Three different on / off
00
am
00
am
Antenna
Channel
Air
3
Tue Wed Thu
Fri
Sat
17
English

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

500 serieLn22c500b2fLn22c500

Tabla de contenido