Remove The O-Ring - Olympus PPO-EP03 Manual De Instrucciones

2. Advance Check of the Lens Port

Remove the O-ring

Remove the rear cap and remove the O-ring fitted to the Lens Port.
1 Insert the O-ring remover into the gap between the O-ring and O-ring
groove wall.
2 Slip the tip of the inserted O-ring remover below the O-ring.
(Be careful not to scratch the O-ring groove with the tip of the O-ring
remover.)
3 Lift the O-ring, pinch it with your fingertips and pull it out of the Lens
Port.
• Use the O-ring remover supplied with the Case.
EN
EN 23