Technical Specifications - Flex WL 2800 18.0 Instrucciones De Funcionamiento Originales

WL 2800 18.0
■ When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
■ Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
■ Do not use a battery pack or appliance
that is damaged or modified. Damaged
or modified batteries may exhibit
unpredictable behavior resulting in fire,
explosion or risk of injury.
■ Do not expose a battery pack
or appliance to fire or excessive
temperature. Exposure to fire or
temperature above 265°F (130°C) may
cause explosion.
■ Follow all charging instructions and do
not charge the battery pack or appliance
outside of the temperature range
specified in the instructions. Charging
improperly or at temperatures outside
of the specified range may damage the
battery and increase the risk of fire.
■ Have servicing performed by a qualified
repairperson using only identical
replacement parts. This will ensure that
the safety of the product is maintained.
■ Do not modify or attempt to repair the
appliance or the battery pack except as
indicated in the instructions for use and
care.
■ To reduce the risk of injury, close
supervision is necessary when a product
is used near children.
■ Do not contact hot parts.
■ Only use attachments recommended or
sold by the manufacturer.
■ Do not use in the rain.
■ o reduce the risk of electrical shock, do
not put the appliance in water or other
liquid. Do not place or store appliance
where it can fall or be pulled into a tub
or sink.

Technical specifications

B
WL 2800 18.0
V d.c. Rated Voltage
W Rated power
Rotation angle of
°
lamp head
m Kg
Recommended
T operating
temperature
LM Total flux
Overview (see figure A)
The numbering of the product features refers
to the illustration of the machine on the
graphics page.
1 Lens(Transparent Cover)
2 Integral Hook
3 ON/OFF Switch
4 Soft Grip
5 Tripod Mounting Hole
6 Vehicle Charging Adapter
7 Belt Clip
Operating instructions
NOTE
When the power tool is switched off, the tool
continues running briefly.
For further information on the manufacturer's
products go to www.flex-tools.com.
WARNING!
Before performing any work on the power
tool, remove the battery pack from the tool.
Before switching on the power
tool
Remove the battery pack from the tool and
check that there are no missing or damaged
parts.
18V(battery) /
12V (vehicle
power source)
27
200
1.04
-10 – 40°C
2800/1100
11