B-550 Bubble King™ QRG
About This
Guide
Disclaimer
Safety Notes
The Bubble King™ (B-550) Quick Reference Guide (QRG) only contains the
product's connection, mounting, and operation information. Download the
User Manual from
www.chauvetlighting.com
The information and specifications contained in this QRG are subject to
change without notice.
These Safety Notes include important safety information about installation,
usage, and maintenance.
·
Always connect this product to a grounded circuit to avoid the risk of
electrocution.
·
Always disconnect from the power source before cleaning this product.
·
Never disconnect this product from power cord by pulling or tugging on
the cord.
·
If mounting this product overhead, always secure it to a fastening device
using a safety cable.
·
Do not mount this product on a flammable surface.
·
Do not drink the bubble fluid. If you do, call your local emergency
service (911 in the US) for help.
·
Do not add perfume, alcohol, gasoline, or other flammables to the fluid.
·
Make sure the voltage of the outlet to which you are connecting is within
the range stated on the decal or rear panel of the product.
·
This product is for indoor use only! (IP20) To prevent risk of fire or
shock, do not expose this product to rain or moisture.
·
Always install this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
·
Be sure that no ventilation slots on the unit's housing are blocked.
·
Do not obstruct the bubble wands or leave machine unattended.
·
Never connect this product to a dimmer.
·
Never carry this product from the power cord or any moving part.
·
The maximum ambient temperature is 104 °F (40 °C). Do not operate this
product at higher temperatures.
·
Do not overfill; spillage may occur. Always mount on a flat, level surface.
·
Do not leave unused fluid in the reservoir for an extended period. The
fluid may thicken in the reservoir.
·
In the event of a serious operating problem, stop using the unit
immediately.
·
Never try to repair this product. Repairs performed by unauthorized
technicians can lead to damage or malfunction. Please contact the nearest
authorized technical assistance center.
for more details.
2
EN