Quick Reference - Honeywell Home VisionPRO 8000 Smart Manual Del Usuario

Quick reference: residential use
The screen lights when you press any button. It stays lit for 45 seconds after you complete
changes. Depending on how your thermostat was installed, the screen light may always be on.
Quick reference: commercial use
33-00066EFS—05
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (Heat/Cool).
MENU. Touch to display options. Start here
to set a program schedule.
Current status. Shows system mode
(heat/cool) and outdoor temperature (with
optional outdoor sensor).
Current schedule. Touch an arrow to
change temperature setting and select a
Temporary or Permanent Hold.
Indoor conditions. Shows indoor
temperature and humidity.
Current time. Touch to set the current time/
date. See page 5.
Alert Light. On when alert message is
active or system is set to EmHeat.
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (Heat/Cool).
MENU. Touch to display options. Start here
to set a program schedule.
Current status. Shows system mode
(heat/cool) and outdoor temperature (with
optional outdoor sensor).
Override. Touch to override program
schedule.
Current schedule. Touch an arrow to
change temperature setting and set a
temporary hold.
Current program status.
Indoor conditions. Shows indoor
temperature and humidity.
Current time. Touch to set the current time/
date. See page 5.
Alert Light. On when alert message is
active or system is set to EmHeat.
1