Cleaning The Lens - Uline H-5802 Manual Del Usuario

WARNING! To reduce the risk of injury,
always remove the battery from the tool
before performing any maintenance. Never
disassemble the tool. Contact Uline Customer
Service at 1-800-295-5510 for all repairs.
MAINTAINING TOOL
• Keep your tool in good condition by adopting a
regular maintenance program.
• If the tool does not start or operate at full power with
new battery, clean the contacts on the battery door.
• If the tool still does not work properly, contact Uline
Customer Service at 1-800-295-5510.

CLEANING THE LENS

1. Blow off loose particles with clean compressed air.
2. Carefully wipe the surface with a cotton swab
moistened with water.
3. Using a second cotton swab, dry completely.
WARNING! To reduce the risk of personal injury
and damage, never immerse your tool in liquid
or allow a liquid to flow inside it.
PAGE 4 OF 12
MAINTENANCE
CLEANING
• Clean dust and debris from tool.
• Keep tool handle clean, dry and free of oil or
grease.
• Use only mild soap and a damp cloth to clean the
tool, since certain cleaning agents and solvents
are harmful to plastics and other insulated parts.
Some of these include gasoline, turpentine, lacquer
thinner, paint thinner, chlorinated cleaning solvents,
ammonia and household detergents containing
ammonia.
• Never use flammable or combustible solvents
around tools.
REPAIRS
For repairs, contact Uline Customer Service
at 1-800-295-5510.
1-800-295-5510
uline.com
0621 IH-5802