Ec Declaration Of Conformity; Noise/Vibration Information - Würth EPM 160-E Traducción Del Manual De Instrucciones De Servicio Original

OBJ_BUCH-0000000218-002.book Page 16 Thursday, August 20, 2015 10:47 AM
Disposal
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Do not dispose of power tools into household waste!
Only for EC countries:
According to the European Guideline
2012/19/EU for Waste Electrical and
Electronic Equipment and its implemen-
tation into national right, power tools
that are no longer usable must be col-
lected separately and disposed of in an environmen-
tally correct manner.

Noise/Vibration Information

Measured sound values determined according to
EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 79 dB(A); Sound power
level 90 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Overall vibrational values (vector sum of three direc-
tions) determined according to EN 60745: Vibrational
emission value a <4.9 m/s 2 , uncertainty K=1.5 m/s
h
The vibration emission level given in this information
sheet has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a
preliminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different accesso-
ries or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool is
switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the oper-
ator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organ-
isation of work patterns.
EC-Declaration of Conformity
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standarisation documents: EN 60745 in accordance
with the Directives 2004/108/EC (→ 2016-04-19),
2014/30/EU (2016-04-20 →), 2006/42/EC,
2011/65/EU.
Technical file at:
Adolf Würth GmbH & Co. KG, Abt. PCM
Reinhold-Würth-Straße 12 – 17,
74653 Künzelsau, Germany
Marcel Strobel
Head of Product
Management
Künzelsau: 20.08.2015
Subject to change without notice.
2 .
Dr.-Ing. Siegfried Beichter
Head of Quality,
Authorized Signatory
16