Chauvet LFS-5D Guía De Referencia Rápida página 3

EN
What Is
Included
To Begin
Description
Overview and
Mounting
Mounting
AC Power
Power Linking
Fuse
Replacement
• LFS-5D
• Power Cord
• 4 Metal Gobos
Unpack your LFS-5D and make sure you have received all parts in good
condition. If the box or contents appear damaged, notify the carrier
immediately, not CHAUVET®.
The LFS-5D is a compact and lightweight LED framing spot, with framing
shutters that can alter the beam to highlight specific areas. Using the included
gobos or your own custom gobos, you can project your image from almost
any distance with the 16°-24° zoom range. Fade the LED by connecting to a
dimmable circuit.
Mounting
Bracket
Framing
Shutter
(x4)
Bracket
Adjustment
Knob
Before mounting this product, read the Safety Notes.
This product has a single-voltage power supply and it can work with an input
voltage of either 120 VAC, 60 Hz or 230 VAC, 50 Hz.
You can link up to 23 LFS-5D products at 120 VAC or 45 units at 230 VAC.
1. Disconnect the product from power.
2. Using a flat-head screwdriver, loosen the fuse holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
• Warranty Card
• Quick Reference Guide
Power Out
3
LFS-5D QRG
Fuse
Holder
Power In