Front View - Chauvet DJ Bubble King Guía De Referencia Rápida

B-550 Bubble King ™ QRG
Setup Install the sleeve to the front of the bubbler, using the 4 provided screws.
Fill/Replace
1.
Bubble Fluid
2.
3.
4.
Operation 1.
2.
Screws x 4
Place the Bubble King™ on a level surface and loosen the 4 thumb screws on
either side of the unit for fluid tank access.
Once removed, lift the cover.
Fill the tank with bubble fluid. DO NOT FILL PAST TOP OF FLUID
RESERVOIR.
Note: We recommend using CHAUVET® bubble fluid (BJU) which has
been specially formulated for use with CHAUVET® Bubble King™
products. The tank capacity is 56 oz (1.7 l).
Lower the cover and tighten thumb screws.
Plug into a suitable wall outlet.
Turn on the Bubble King™.
Note: Do not leave unused fluid in the reservoir for an extended period.
The fluid may thicken in the reservoir. Remove all fluid before packing or
shipping.
5

Front View

Sleeve
Thumb
Screws x4
EN