JVC LT-32HG82WU Manual Del Usuario página 180

Basic Feature
Channel management (ATV / DTV Mode)
3. Press the
menu and change the settings.
Country
Selects the country where you will operate the
TV.
Mode
ATV. (DTV mode)
Scan Type
Frequency
Symbol Rate
Start
Press the ENTER button to start auto tuning.
Auto Scan
Scanning CH34
Digital Channels Found:
DTV :10 Radio :0 Data:0
Analog Channels Found: 0
If you stop the tuning before it has
finished, the TV will report a no signal
error. This is normal because all previous
channel memory has been cleared before
tuning is carried out.
Manual Scan (DTV Mode)
adjustments to the channel under DTV mode.
1. Press the MENU button to display the main
menu. Press the
in the main menu, then press the
24
buttons to navigate the
MENU: Skip EXIT: Exit
buttons to select Channel
or ENTER
Channel
Tuner Type
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favorite Manager
Common Interface
Signal Information
Move OK: Select
2. Press the buttons to select Manual
Scan and then press the ENTER button. On the
submenu, select Digital Manual Scan and then
press the ENTER button.
Tuner type is Antenna
Digital Manual Scan
Digital Scan
Start
Frequency
Strength
Move Adjust 0~9 Input
Tuner type is Cable
Digital Manual Scan
Network ID
Frequency
Symbol Rate
Modulation
Start
Strength
Move Adjust
Tuner type is Antenna.
Digital Scan
the desired channel.
Start buttons to select Start and
then press the ENTER button to start tuning.
Tuner type is Cable.
Press the
Symbol Rate: Press the
Modulation: Press the
256QAM.
Start buttons to select Start and
then press the ENTER button to start tuning.
Cable
Off
MENU: Return EXIT: Exit
CH21
474.00 MHz
0
MENU: Return EXIT: Exit
Auto
474000 KHz
Auto
Auto
0
MENU: Return EXIT: Exit
buttons to select
buttons to select
buttons to select
buttons to select Mo