ABB T1 PLUS Manual De Instrucciones página 6

Commissioning
1. Set to the required lux scale value ( 2-40; 20-200; 200-2000;
2000-15000 ), using the front adjustment knob (3).
NOTE: the device provided with the selector switch on the
indicator relative to 10 lux.
When the device has been connected and the threshold value
reached,T1 PLUS will switch on the green LED (A) and then it
will also switch on the red LED (B) after a pre-set time to indicate
actual relay switching.
2. Set the required lux percentage (0%->100%), using the front
adjustment knob (2);
3. Set the switching time (MIN->MAX) using the front adjustment
knob (1).
6
A
B
1
2
3