Initial Use - Tetra EX 500 Plus Manual De Instrucciones

INITIAL USE

NOTE
• The filter needs a run-in period of approx. 2 weeks. Do not introduce any
fish or plants during this time!
Tip: Tetra SafeStart (accessories) allows fish and plants to be introduced
as soon as the aquarium is set up.
• Before introducing fish and plants, check the water values, for example
with a Tetra test strip (accessories).
• If you are adding medication to the water, you should only use filter media
without activated carbon because activated carbon absorbs many types
of medication from the water.
Procedure: → Fig. F
Please note the following during start-up:
• The shut-off lever on the filter head must be pushed upwards to the stop
("ON" position). Both stopcocks must be fully open.
• To bleed, press the start button several times in quick succession (pump)
until water comes out of the return pipe and the flow is stable.
• Make sure that all of the hose connections are tightly connected.
• Top up the water in your aquarium, as the water level will have dropped
from filling the filter.
• Position the outlet tube in the aquarium in such a way that it creates slight
movements at the water surface. This is good for the water quality. If
necessary, the flow rate can be adjusted using the "IN" stopcock.
UK
15