Kenwood TCM810 Instrucciones página 5

before plugging in
Make sure your electricity
l
supply is the same as the one
shown on the underside of
your toaster.
WARNING: THIS APPLIANCE
l
MUST BE EARTHED.
This appliance conforms to
l
EC Regulation 1935/2004 on
materials and articles intended
to come into contact with
food.
before using for the first time
(A) - Clip excess cord into the
l
cord storage clips in the base
8
.
Operate the toaster once on
l
a medium setting without
bread. (The lever will not stay
down unless the toaster is
plugged in).
As with all new heating
l
elements, your toaster may
emit a slight burning smell
when it is first switched on.
This is normal and not a cause
for concern.
key
removable warming rack
1
(if supplied)
carriage lever (with
2
'Hi-Rise™' for extra lift)
browning control
3
cancel button with
4
indicator light
defrost button with
5
indicator light
bagel button with
6
indicator light
crumb tray
7
cord storage
8
to use your toaster
1 Plug the toaster into the
power supply.
2 Turn the browning control until
the desired setting aligns with
the line up mark on the body
of the toaster. Use a lower
setting for light toasting and
for thin or dry bread.
3 Insert the bread, muffins,
bagels etc.
4 Lower the lever
locks. (The lever will not stay
down unless the toaster is
plugged in). The 'cancel'
button will illuminate.
5 Your toast will pop up
automatically, to raise it higher,
lift the lever.
5
2 until it