Removing/Inserting The Battery; Switching On And Off; Setting The Rear Handle; Working With The Hedge Trimmer - Grizzly Tools AHS 2020-52 Li Traducción Del Manual De Instrucciones Original

the label on the equipment.
Reduce the risk of injuries and
accidents by wearing personal
protection equipment and
ensuring that the unit is fully
functional.
Note noise protection and local
specifications.
Removing/inserting the
battery
1. To remove the battery from the device,
press the release button (13) on the
battery (9) and pull the battery out.
2. To insert the battery (9), place it on the
guide track (14) and push it back into
the appliance. It will audibly snap in.
Do not insert the battery until
the appliance is fully assembled.
Risk of injury!

Switching On and Off

Ensure that you are standing in a
firm position with both hands grip-
ping the hedge trimmer away from
the body. Ensure that the trimmer
is in contact with no other objects
before switching on.
Removing the blade guard:
1. Press the blade guard (
points marked
move it.
Turning on:
2. Check that the battery (9) is in (see

"Removing/inserting the battery").

3. Press the safety switch (4) at the front
handle (5).
4. Press the On/Off switch (7). The
5. Release the safety switch (4) or the
The rear handle (8) can be placed into
three different positions (-90°, 0° and 90°).
1. Slide the release button (15) back-
2. Rotate the rear handle (8) into the de-
3. Let go of the release button (15). The
Working with the Hedge
Trimmer
•
•
11) at the
and re-
•
hedge trimmer will run at top speed.
Turning off:
On/Off switch s (7).

Setting the rear handle

wards.
sired position.
rear handle (8) will latch into position.
During cutting work, ensure that no
contact is made with objects, e.g.
such as wire fencing or main plant
stems. This may result in damage
to the cutter bar.
While working, hold the device firmly
with both hands, with one on the front
(5) and one on the rear (8) handgrip
(see ).
If the blades become jammed with solid
objects, turn the device off immedi-
ately and remove the rechargeable
battery. Only then should you remove
the object.
Avoid overstraining the equipment
during work.
GB
71