MyTek 3400 Manual Del Usuario página 20

Maintenance Cleaning
To obtain the best results, allow the Honeycomb Cooling Filters to dry after each use by turning off the
cooling pump and turning on the Cooler 15 minutes before turning off the unit.
* Please disassemble or clean the appliance only after water is drained and the power cord is unplugged.
* Please drain all the water in the tank and dry the Honeycomb Cooling Filters, if the appliance will not be
used for an extended time.
* The cleaning frequency for the Honeycomb Cooling Filters depends on local air and water conditions.
* In areas where water mineral content is high, deposits may build up on the Honeycomb Cooling Filters
and restrict the air flow.
* It is recommended that cleaning and draining the water tank, and then refilling it with clean fresh water
once a week may help reduce mineral deposits. If mineral deposits build up on the Honeycomb Cooling
Filters, please remove the pads and wash them gently under fresh water.
* Never use corrosive elements or chemicals to clean this product.
* When the unit is not in use, please store the Cooler in a dry place away from direct sun.
* When it is necessary to store the Cooler due to seasonal changes, the power cord can be stored on the
cable storage hooks (N) on the rear side of the appliance.
17
N