Jacuzzi Taryn Instrucciones De Instalación

Taryn Seat Installation Instructions
TM
Reference
a
Parts/
Hardware
Description
Screw
Quantity
2
Warning：
Using an abrasive cleaner (such as a toilet bowl cleaner) on the seat, seat cover, hinges or hinge covers can cause damage.
If any of these components come into contact with such a cleaner, use a damp rag or sponge to wipe off immediately.
1
1. Seperate hinge covers from hinges.
4
4. Install seat and snap into place.
7
7. With seat removed, secure the hinge
bases by tightening the screws. Make sure
to tighten the screws enough so the hinge
bases do not easily rotate or slide.
b c
Plug insert Hinge Hinge cover
2 2
2
2. Wet the rubber plug inserts with water
and press them down into the bowl holes
shown. Make sure the flange of the insert is
on the top side and is flush with the bowl
surface when pressed in. Assemble the hinge
bases and screws as shown.
5
5. Adjust the seat to fit with bowl edge.
8
8. Assemble the hinge covers over the bases
and re-mount the seat as shown. The seat is
now completely installed and ready for use.
d
Helpful Tool:
Phillips Screwdriver
2
1
3
3. Do not fully tighten screws to allow for
adjustment in Step 5.
6
6. Once seat is fitted to desired position on
the bowl, lift seat off the hinges by pushing
the two buttons together and lifting up on the
seat, as shown.
Guarantee:
This product is covered 1 year warranty.
STOP! Do not return to retailer.
For help, please call Jacuzzi Customer
Service:1-800-288-4002
Available 9:00AM – 8:00PM
EST Monday -Friday.
565169 15-1.2