Philips Multigroom Serie Manual Del Usuario página 15

Problem Possible
cause
The The
appliance rechargeable
does not battery is
work empty.
anymore.
The The
appliance appliance
does not has to be
charge switched off
when it is when you
connected charge it.
to the mains.
The The cutting
appliance element
does not of the
trim as well attachment
as it used to. you are using
is dirty.
The The cutting
appliance element
becomes of the
hot. attachment
you are using
is dirty.
Solution
Charge the appliance (see chapter
'Charging'). Make sure you switch off
the appliance before you charge it.
During charging, the charging light on
the adapter flashes. If the charging light
does not flash, check whether there is
a power failure or if the wall socket is
live. If there is no power failure and the
wall socket is live but the charging light
still does not flash, take the appliance to
your dealer or a Philips service centre.
Switch off the appliance.
Remove the attachment from the
appliance. Clean the attachment under a
lukewarm tap.
Remove the attachment from the
appliance. Clean the attachment under a
lukewarm tap.
EnGlish
15