Getting Started - Oregon Scientific BlisScent WA633 Manual Del Usuario

• Children and pets should be supervised when the
unit is in operation.
• Please follow instruction from your essential oil
manufacturer before adding into water
• Ensure the unit being collected separately for
special waste treatment when disposing.
• The contents of this manual may not be reproduced
without the permission from Oregon Scientific.
DON'Ts
• DO NOT turn the unit upside down without
removing all the covers and liquid content from
the water tank.
• DO NOT block the ventilation inlet at the bottom by
placing the unit on soft surface such as cushions,
or carpet.
• DO NOT let water, detergent or any other liquid
enter the ventilation inlet or outlet.
• DO NOT tamper with the unit's internal components.
This invalidates the warranty.
• DO NOT subject the unit to excessive force, shock,
dust, temperature or humidity.
• DO NOT cover the unit with newspapers, curtains
etc. when in operation.
• DO NOT direct the mist towards any electrical
appliance, furniture, plant, paint or heat source.
• DO NOT inhale mist directly from the mist outlet.
• DO NOT clean or touch the diffusing plate during
operation.
• DO NOT use water from which have been drunk.
• DO NOT place the unit directly on the floor. Flooring
may be damaged if in direct contact with the mist
for a prolonged period.
• DO NOT use in humid locations.
• DO NOT fill the water container beyond the MAX
mark indicated.
• DO NOT immerse the unit in water. If you spill liquid
on the unit, dry it immediately with a soft, lint-free
cloth.
• DO NOT clean the unit with alcohol, abrasive or
corrosive materials.
• DO NOT use water over the room temperature.
NOTE
• Images in the manual may differ slightly from
actual unit.
• When the water level is low, the unit stops
diffusing mist.

GETTING STARTED

1. Remove the glass and plastic cover from the unit.
2. Plug the power adapter into the adapter jack.
3. Place the unit in a stable surface.
4. Pour filtered tap water in room temperature into
the water tank. Do not exceed the MAX mark.
5. Add few drops of essential oils into the water.
Please follow the instruction from essential oil
manufacturer.
6. Place the covers back to the main unit.
7. Plug the power adapter to the power outlet.
Make sure the adaptor is not obstructed and is
easily accessible to the unit.
2
MAX