Steren CCTV-200 Manual De Instrucciones página 5

6.- Click twice over the camera IP address.
7.- Then, Windows Explorer will run automatically.
8.- Type the password (this software do not includes a
predetermined password, just click Enter) then you can obtain
access to the camera.
The IP address is given automatically by the software, The IP address is given automatically by the software,
however, you can confi gure the parameters manually, to do however, you can confi gure the parameters manually, to do
it, refers to Manual Confi guration. it, refers to Manual Confi guration.
IP ADDRESS MANUAL CONFIGURATION
Once you have connected and confi gured the camera, you can
change the parameters of the IP address.
1.- Run Up Camera Tool, in the screen you can see a window
with the IP address assigned by the software.
ENGLISH-5