Battery Installation; Connecting The Receiver - Steren COM-567 Guia De Inicio Rapido

BATTERY INSTALLATION

1.- Remove the battery compartment cover.
2.- Install two batteries type AAA into the compartment, paying
attention to the right polarity.
3.- Replace the battery compartment cover.

CONNECTING THE RECEIVER

1.- Turn the computer on.
2.- Take the receiver out from the compartment and plug it into
an available USB port.
3.- The computer detects the new device. Windows XP
automatically will install the required drivers. On other systems
may run the Found New Hardware Device assistant, follow the
instructions. The required drivers are already on Windows OS.
4.- Now you can use the mouse, normally.
6.- To set the mouse options, click on Control Panel / Mouse to
customize your mouse settings.
You will fi nd the Control Panel menu on Windows Start You will fi nd the Control Panel menu on Windows Start
Menu. Maximum effective range: 5ft Menu. Maximum effective range: 5ft
If you want to use the mouse in other computer, unplug If you want to use the mouse in other computer, unplug
the receiver from the USB port and keep it into the receiver the receiver from the USB port and keep it into the receiver
compartment. compartment.
SPECIFICATIONS
Input:
Dimensions:
Weight:
Product design and specifi cations are subject to change, Product design and specifi cations are subject to change,
without notice. without notice.
3V
3,9 x 2,5 x 1,4in
70,8g
ENGLISH-3