Tuning In A Station; Tuning In By Adjusting The Frequency; Radio Reception - Sony XR-6030 Manual De Instrucciones

Tuning in a Station

1
VOLUME BALANCE
POWER OFF
Searching for the Stations
Automatically
1
Turn clockwise to turn the power on.
2
Press to select the desired band, FM1, FM2, or AM.
FM/AM
Press the PUSH SEEK button.
3
Stations will be scanned automatically and scanning will
stop when a station is tuned in. Repeat pressing the PUSH
SEEK button until the desired station is tuned in.
PUSH
SEEK
/MANU

Tuning in by Adjusting the Frequency

— Manual Tuning
1 Press to select the desired band. FM1, FM2, or AM.
2 Press the PUSH MANU button for more than two seconds;
the sound will mute. When it comes on again (manual mode
is entered).
3 Press the preset number button 1 or 3, and adjust the
frequency.
For lower
frequencies
If you don't adjust within two seconds, the manual mode will be
canceld.
PREVENTING ACCIDENTS!
While you are driving, the use of Automatic Tuning and the
Memory Preset Tuning is recommended instead of the Manual
8
Tuning.
2
Preset Number Button
EJECT
DSPL
FM/AM
— Automatic Tuning
1 3
MANU
PUSH
DIR
SEEK
/MANU
BASS
1 2 3
MANU
4 5 6
For higher
frequencies
3
HI-FILTER
When an FM stereo program
with a sufficient signal
strength is tuned in
ST
FM1
The "ST" indication appears.
To play back a cassette during

radio reception

Insert a cassette. The radio will be
turned off and playback will start
automatically.