FAAC DOMOSOLAR Manual Del Usuario página 4

4. Solar panel connections
Open the connection box and connect the wires of the
supplied cable to the clamps, to which the terminals are
already connected. Connect the other end of the
cable to the J2 connector of the Domo Master
equipment (See Domo B instructions)
5. Cables
The cable supplied with the panel has a length of 5m
and diameter of 2x1.5mm². If you need to make a
longer connection, use a cable with the following
sections:
Up to 15m: Cable H07RNF with a section of 2x2.5mm²
Up to 30m: Cable H07RNF with a section of 2x4mm²
Over 30m: Cable with a section of 2x6mm
FAAC S.p.A
Via Benini, 1 40069 Zola Predosa (BO) - ITALIA Tel: 051/6172411 Fax: 051/758518
O
N
S
E
4
60 gradi
FIG2