How To Use - Ravpower RP-PB187 Manual Del Usuario

AC Output Switch Button
• When the AC output is off, press and hold the AC Output Switch Button for 5
seconds to turn on the AC output. The AC output indicator will light up indicating the
two outputs are ready for use now.
• To turn off the AC output, press and hold the AC Output Switch Button for 5 seconds.
Note: Please do not connect the AC outputs to the mains supply.

How to Use

• Use the Type-C cable to connect the portable power outlet to your device and
charging will start automatically. If nothing happens after connecting your device,
press the power button to restart the outlet.
• Press and hold the AC Output Switch Button to turn on the AC output. The AC output
will shut off automatically when no connection is made after powered on for 1 minute.
• Press the Power Button once to check the remaining battery level.
• Use a 12-24V adapter to charge the portable power outlet.
• DC Input: Support solar power input.
EN/03
Note: When battery is low and the output power is higher than that of input,
the portable power outlet will stop working.
Caution
• It is normal for the portable power outlet to become slightly warm during charging /
discharging.
• Keep away from heat sources and liquids.
• Please do not dismantle this product.
• Fully charge the portable power outlet at least once every 6 months.
Warranty
RAVPower products are covered by an 18 month limited warranty from the date of its
original purchase. If any problems occur, please contact our support team.
We can only provide after sales service for products that are sold by RAVPower or
RAVPower authorized retailers and distributors. If you have purchased your unit from a
different place, please contact your seller for return and warranty issues.
EN/04