VOX electronics MS-984 Manual De Usuario página 5

USING YOUR STICK BLENDER
Note: The time running unit without load can't exceed 15s. Max operation duration
under high speed per time cannot exceed 1 minute. Minimum 10 minutes rest time
shall be maintained between two continuous cycles.
Important:
1. Ensure that the stick blender is unplugged from the power outlet before
assembling or removing attachments.
2. Do not use the appliance to mix the hot soup as the plastic shaft may be melt.
Instruction for blender
1. To assemble the detachable shaft with the motor unit, turn the shaft anti-
clockwise direction until tightened. To disassemble, just turn in the adverse
direction.
2. Simply plug the stick blender to power outlet.
3. Lower the stick blender into food and depress the switch at the top of the motor
unit.
4. To stop the stick blender take your fingers off the switch button.
Instruction for chopper
1. Place the chopper bowl on a clean, level surface.
2. Assemble the stainless steel blade into the chopper bowl, as shown in Fig 1.
3. Place food into the chopper bowl.
4. Attach the Lid onto the chopper bowl and turn it in clockwise direction until it locks
into position (see Fig.2). To detach the lid, turn in adverse direction.
5. Insert the top part of the chopper into the hole of the chopper lid, and turn in
clockwise direction to lock (See Fig 3).
6. Plug the appliance to power outlet and depress the switch to begin operation.
7. To stop the appliance, take your fingers off the switch button.
Caution:
–– To reduce the risk of injury, never place cutting blade on base without first putting
bowl properly in place.
–– Be sure chopper lid is securely locked in place before operating appliance.
4