Publicidad
Idiomas disponibles
Idiomas disponibles
CONFIGURE METHOD # 2
If you cannot add the camera by scanning the QR code, follow the steps below:
1.
Power the room
2.
Open the TuyaSmart application
3.
Press "Add Device" or "+" in the upper right corner.
4.
Select "Security & Sensors" → "Smart Camera"
5.
In the next interface press "Other Mode"
6.
Select the "AP Mode" option
7.
Confirm in the application if the device is blinking.
8.
From the following interface, select the WiFi network, enter the password and press "Confirm"
9.
Connect your phone to the alarm system hotspot. Click "Go to Connect"
10. From the list displayed select "SmartLife_XXXX" to connect.
11. Wait for the phone and the alarm device to connect
User manual
EN
3
Publicidad
